2023 Jones Stratos Snowboard

Wend Natural Wax
Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.

Sintered 9900 Base
Made from Ultra-High Molecular Weight Polyethylene (UHMWPE) and Carbon. This ultra-fast base is easy to repair thanks to UHMWPE.

Biax Fiberglass
A dual-direction, dual-layer, stitched fiberglass laminate that provides a fun, forgiving and snappy ride.

Float Pack
Allows super setback stance for deep pow days.

Bio Resin
Bio Resin is a bio-based epoxy made with 27% plant-based carbon instead of petroleum-based carbon. The organic raw materials used to make bio-resin are co-products or waste products of plant-based industrial processes. Bio-resin requires 33% less greenhouse gas emissions to produce than conventional epoxy.

Oversized Recycled Edges
All Jones boards are made with oversized recycled steel edges for added durability and improved production sustainability.

Recycled ABS Sidewalls
ABS Plastic is one of the necessary evils of snowboard production. We improve the sustainability of our snowboards by using only recycled plastic.

Factory Tuned
All Jones Snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.

Forever Flex
Forever Flex is a new manufacturing process that helps stabilize the flex and rocker of a board for its lifetime.

Basalt Power Stringers
Sustainable strength. Basalt stringers are made with 100% natural fibers and help transfer power to the edges, improve torsional response and absorb board chatter.

Textured Eco-Plastic Topsheet
Bio-plastic topsheet made from Castor beans featuring a subtle texture for added durability. This eco-material is ultralight, chip/scratch resistant and water/snow repellent (snow sticks less to topsheet).

Directional Rocker
A hybrid rocker/camber flex pattern defined by more tip rocker than tail rocker and camber between the bindings. The rockered tip floats the board's nose and improves maneuverability while the camber underfoot provides edge hold and response. A slightly rockered tail maintains the power and stability of a traditional board but helps keep the tail catch-free initiating turns and landing switch.

"My experience is that most falls in freeriding start from the nose of the board-- you either go over the bars in powder, the nose gets caught under a weird crust and tosses you, or you hit a hard tranny at the contact point of the tip and get bucked. Directional Rocker eliminates most of these falls."
-Jeremy Jones

1. Traction Tech 3.0
Traction Tech 3.0 features three bumps per edge (front binding, board center, back binding). The middle bump is slightly bigger than the outside the bumps for better grip.

2. Progressive Sidecut
At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

Tapered Shape, 10 mm
The tapered shape sinks the tail in pow for better float and quicker turns.

Blunt Nose
"How a board glides in powder, crust, corn or any snow more than an inch deep, is dictated by it's front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the 'snow plow' rounded tip and its extra swing weight."
-Jeremy Jones

Directional Flex Pattern
Off set tip-to-tail flex pattern that is designed for directional freeride boards. The nose, center of board and tail are slightly different stiffnesses to help lift the nose, sink the tail and improve stability at speed.

V-Core
Jones exclusive wood core profiling that offers a stable and playful board feel. The wood core is softer between the feet for easy turn initiation and stiffer in the nose and tail for stability riding through uneven terrain and landing airs.

3D Contour Base
Freeride focused 3D base contours featuring an even balance of 7mm of spoon bevel in the nose and 7mm of spoon bevel in the tail. Spoon bevel starts at the rocker point.